559 series snap-in led - .250 mounting hole panel mount indicators mechanical information mounting hole size: 0.249 - 0.252" (6.32 - 6.40 mm) panel thickness: 0.031 - 0.062" (.787 - 1.57 mm) electrical specifications operating voltage: 1.6 - 2.3 vdc typical (current limiting resistor required) 5 vdc typical (resistor not required) 12 vdc typical (resistor not required) 24 vdc typical (resistor not required) operating temp: see table storage temp: (-67f to +212f) -55c to +100c electrical connection: straight terminals for wire wrapping or either 6 or 14 inch 24 awg lead wire leads: straight leads 2 leads 3 leads - common cathode construction housing: black housing material meets: ul94v-0 and enhances led contrast features & benefits ? rohs compliant ? long life - typically 100k hours ? low power consumption - uses up to 90% less energy than an incandescent indicator ? front panel snap-in mounting requires no additional hardware ? no heat generated ? resistant to shock and vibration ? available in both 2 or 3 bicolor leaded versions ? termination - straight terminals for wire wrapping or lead wire for soldering or optional terminals ? t hree leaded bicolor version allows for additional color variations ? available with pvc-free lead wires application dialight's 559 series led panel mount indicator is available with a variety of leds including alingap and ingan technology for high brightness applications, bicolor and integral resistors . these indicators are designed for a variety of applications such as: ? fan tray assemblies ? datacenter infrastructure (servers and storage) ? next-gen wireless infrastructure ? electronic test & measurement instruments ? communications testing equipment ? process controls ? automation ? medical equipment ? handheld devices www.dialight.com see termination led 3 leaded bi-color .032 nom. .438 nom. ultrasonic crimp or epoxy on all 3 leads. (side optional) green wire is green anode for both r/g and y/g bi-color leds common cathode & black wire lead for both r/g and y/g bi-color leds red wire is red anode for r/g bi-color leds red wire is yellow anode for y/g bi-color led a.109 .212 max ?5mm led ?.281 (7,14) anode lead (+) .50.03 (12,70,76) red wire black wire cathode lead (-) .50.005 (1,470,127) typ. housing (valox) housing (valox) ?5mm led .210 (5,33) max .125.005 (3,170,12) .025 sq (0,64) ref .050 ref (1,27) cathode lead (-) .300 (7,62) min .625 (15,88) max .210 (5,33) max ?.281 (7,14) ref pin 2 pin 1 cathode single color led schematic bi-color led schematic pin 2 green cathode pin 1 red cathode for r/g led yellow cathode for y/g led
www.dialight.com mdel559cx001_a dialight reserves the right to make changes at any time in order to supply the best product possible. the most current version of this document will always be available at: www.dialight.com/assets/brochures_and_catalogs/illumination/mdel559cx001.pdf 559 series snap-in led - .250 mounting hole panel mount indicators ordering information led code color peak wavelength (nm) intensity typ. (mcd) if typ. (ma) vf typ. (v) viewing angle max dc forward current (ma) type operating temp 5501 red 635 125 20 2.2 24 30 non-tinted non-diffused -55c to +100c 5601 yellow 565 120 20 2.3 24 30 non-tinted non-diffused -20c to +100c 5701 green 583 140 20 2.1 24 20 non-tinted non-diffused -55c to +100c 5801 orange 605 90 20 2.2 20 50 non-tinted non-diffused -30c to +85c 5901 yellow 592 3100 20 2 15 50 non-tinted non-diffused -40c to +100c 6001 blue 470 1500 20 3.6 30 30 non-tinted non-diffused -30c to +85c 6101 red 635 2100 20 1.9 15 50 non-tinted non-diffused -40c to +100c 6201 green 525 5000 20 3.5 30 30 non-tinted non-diffused -30c to +85c 6301 orange 609 4000 20 1.9 15 50 non-tinted non-diffused -40c to +100c 6401 white x=.31 y=.32 2500 20 3.5 50 30 non-tinted non-diffused -30c to +85c 1101 red 635 2.3 2 1.7 50 7 low current diffused -55c to +100c 1201 yellow 583 1.8 2 1.9 50 7 low current diffused -55c to +100c 1301 green 565 1.8 2 1.8 50 7 low current diffused -55c to +100c 2101 red 650 6.3 10 2.2 50 20 diffused -25c to +85c 2201 yellow 563 10 10 2.1 65 25 diffused -25c to +85c 2301 green 585 29 @10 10/20 2.1 @20 50 20 diffused -55c to +100c 2501 orange 600 7 10 1.9 60 30 diffused -55c to +100c 5101 red 650 34 20 2.1 50 25 diffused -55c to +100c 5201 yellow 563 34 20 2.2 50 25 diffused -55c to +100c 5301 green 585 34 20 2.2 50 25 diffused -55c to +100c 5401 orange 610 34 20 2.2 50 25 diffused -20c to +85c 0102 red 635 8 10 5 60 7.5 5v integral resistor -40c to +85c 0202 green 565 8 12 5 60 7.5 5v integral resistor -20c to +85c 0302 yellow 583 8 10 5 60 7.5 5v integral resistor -40c to +85c 0103 red 635 8 13 12 60 15 12v integral resistor -55c to +100c 0203 green 565 8 13 12 60 15 12v integral resistor -20c to +85c 0303 yellow 583 8 13 12 60 15 12v integral resistor -40c to +85c 5904 yellow 592 3100 20 2 15 50 24v external resistor -30c to +85c 6104 red 635 2100 20 20 15 50 24v external resistor -30c to +85c 6204 green 525 5000 20 3.5 30 50 24v external resistor -30c to +85c 3001 red/green 660/565 90/40 20 1.8/2.1 60 40/30 2 leaded bi-color -55c to +100c 3101 red/green 660/565 90/40 20 1.8/2.1 60 40/30 2 leaded bi-color -55c to +100c 3201 yellow/green 585/565 12.6/19 20 2.1/2.1 50 20/30 2 leaded bi-color -55c to +100c 3501 red/green 635/565 5.0/8.0 10 2.1/2.3 65 30 3 leaded bi-color -20c to +85c 3601 yellow/green 583/565 20/20 10 1.6/1.6 65 30 3 leaded bi-color -20c to +85c 559-xxx x - 0 x x f led code wire code rohs compliant termination code wire code wire type 0 standard 2 pvc free termination code termination type 1 straight terminals 3 24 awg 6" wire leads 7 24 awg 14" wire leads
|
